93-02 F-body UMI Performance Tubular Front Lower A-Arms (Delrin/Rod End)

UMI Performance tubular lower A-arms are built to offer a strong streetable setup while reducing weight over the factory lower A-arms. By adding UMI Performance lower A-arms you immediately remove 8lbs from the front of the vehicle while adding strength and increased performance. UMI tubular A-arms are designed to outperform the stock setup, whether it’s at the race track or an added improvement to a daily driver, they’ve been tested and improved to handle both applications. These lower A-arms can be installed on the factory K-member or any aftermarket K-member. They are designed to reduce front end weight, as well as “unsprung” weight, providing improved handling performance to the front of your vehicle. UMI Performance A-arms are built using strong DOM steel tubing, 3/16” thick CNC machined shock mounts and new premium ball joints installed. This A-Arm set features a combination of Delrin bushings and rod ends.

UMI front lower A-arms are supplied with high quality spherical bearing rod ends which feature a Teflon lined self lubricating race. These rod ends replace the stock rubber bushings found in the rear of the OEM arms. The rod end design is to allow free movement and travel in the front suspension while adding additional front end adjustment when needed. The factory GM A-Arm features a rubber pivot bushing in this area; this is designed to rotate up and down as the suspension travels. Replacing this bushing with a solid bushing such as polyurethane would not allow the suspension to articulate correctly and would cause front suspension bind. The front bushing location features CNC machined deflection free Delrin bushings. The Delrin bushings are designed to eliminate friction for a faster traveling suspension.

Features:

• Fabricated from 1.250” x 0.120” mild steel DOM tubing
• TIG welded 4140 chromoly threaded tube adaptors
• New premium ball joints installed
• UMI designed Delrin Bushings
• Energy Suspension greaseable polyurethane bushings
• CNC machined ball joint holders
• Brilliant durable powder coat
• Uses OEM Hardware